WP WASTO

effective flood protection

WP WASTO

effective flood protection

WP WASTO

effective flood protection

WP WASTO

effective flood protection

WP WASTO

effective flood protection

WP WASTO

effective flood protection

WP WASTO

effective flood protection

WP WASTO

effective flood protection

 

Effective flood protection with WP WASTO

Husemann & Hücking's system has sucessfully been introduced since 2002 and it is used all over Europe. The stable steel profiles can be mounted in front of doors, windows and gates. WP Wasto can be adaped according to the water level and be can be removed after use. The function is simple and effective: Slats are stacked up with seals between two guide rails in front of or in the reveal and they are tightened to a dam by clamps as a barrier against water and mod.

The system is the optimal solution for direct building protection. Independent of external help, a single person can use this system to seal off a building within a very short time if necessary. All that is required, is the preparatory work by the metalworker. 


 

WP WASTO

As an integral
component
of the
building planning

WP WASTO is made of galvanised steel profiles. Steel is not only more stable than aluminium, the material is above all more filigree, much more environmentally friendly and cheaper. Thus, a building can effectively be protected against flooding at a reasonable price.


 

With and without central posts

Damming widths
up to 4 meters

The system can be installed as a single element with a damming width up to 4 metres and optional intermediate posts. The application is not only limited to windows and doors, but it can also be used without any problems for wide openings such as gates or smaller entrances.


You can find more information on the building protection system on the website www.wpwasto.de

 

Effective building protection with WP WASTO

Download the current brochure in PDF format, 2.3 MB

Installation instructions for the WP WASTO flood protection system

Download the current assembly instructions in PDF format, 3.4 MB

Sprocket bar

for the installation within the wall opening

Easy to use

  • Only a few components form a protective system
  • Thanks to its steel construction, WP WASTO can be integrated delicately into any building envelope
  • lean, modular and indestructible - WP WASTO - the property protection made of steel

Sprocket bar

for the installation within the wall opening

Slat

The slats are inserted into the sprocket bars and can be assembled to bulkhead elements of different heights.

Clamping piece

The clamping pieces are used to tighten the slats in the sprocket bars.

Reinforcing profile

Depending on the daming width and the expected load on the system, the slats can optionally be constructed with reinforcing profiles.

Floor seal

The bottom seal is made of particularly adaptable sealing material and serves as a balance for uneven floors.

HKC

Member of the Flood Competence Centre

  • Husemann supports the Flood Competence Centre as a professional partner with WP WASTO
  • The Flood Competence Centre recommends the proven steel system WP WASTO

Central post

The central post is used for the construction of large and wide retaining walls.